Orange Peel, Obvious Tactile Impression of Particles.

• Color: White
• Appearance: Liquid
• Method: Spray
• Components: Film Forming Matter
• Main Raw Material: Water-Based Polyester Resin
• Level: Finish Coat
• Model NO.: Anti-Fingerprint Varnish-2
• Substrate: Steel
• Expiration Date: 6 Moths

Product Description

Test Item	Technical requirements and methods	Performance	Results
Color	None	water white & slightly yellow	Pass
Substrate	None	#201 steel plate (0.58mm )	Pass
Film forming temperature	210ºC,4min	210ºC,4min	Pass
Appearance of paint film	visually observe	The appearance is good and uniform. No shrinkage cavity and pinhole. Orange peel, obvious tactile impression of particles.	Pass
Film thickness	Film thickness gauge measurement	3-4um	3um
Glossiness	Gloss meter	≥95°	102°
Adhesion	Line distance 1mm, 10×10 squares, pasted with adhesive tape without falling off	Grade 0	Grade 0
Hardness	≥2H	≥2H	2H
Anti-alcohol wipe (times)	Wipe the surface of the coating back and forth with alcohol absorbed by cotton wool until the next layer is seen.(one reciprocation is one time)	1KG wiping, more than 500 times	600 times
PH value	PH meter	8.0-9.0	8.4
viscosity	Coating 4 cups/25ºC/s	≥90	100
T-bend	GB/T13448	≤1	0 T
Impact resistance	After impacting with an impact tester, stick it with 3M tape for 3 times, and visually observe that	50kgf.cm, no cracking, no falling paint qualified	Pass
cupping	there is no crack at 8mm	8mm without cracking	Pass
Conclusion	Pass