Product Description
FAXUS Water-based lacquers are formulated partially using water as the optional solvent, significantly reducing the emission of volatile organic compounds (VOCs) compared to their solvent-based counterparts. This makes them an environmentally friendly option, aligning with increasing regulatory and societal pressures for greener manufacturing processes. The shift towards water-based systems also addresses safety concerns by minimizing the risk of fire and health hazards associated with solvent inhalation.
The surface treatment of metal coils and plates, particularly through the application of lacquers, plays a pivotal role in enhancing their durability, aesthetic appeal, and resistance to environmental factors. Among the various lacquering options available, water-based lacquers have emerged as a preferred choice due to their environmental benefits, safety, and performance.
Our Advantages
FAXUS water-based lacquers for metal coils offer
- Excellent adhesion and flexibility
- Fingerprint resistance
- Anti-corrosion properties
- Good durability for metal surface effect
- Enhancing product aesthetics
These properties are critical in maintaining the integrity and appearance of metal coils used in diverse industries, from automotive to construction. The application process of water-based lacquers is also conducive to modern industrial practices, allowing for efficient and uniform coating through methods such as roll coating, spraying, and dipping.
Product Parameters
| Test Item |
Technical requirements and methods |
Performance |
Results |
| Color |
None |
water white & slightly yellow |
Pass |
| Substrate |
None |
#201 steel plate (0.58mm ) |
Pass |
| Film forming temperature |
210ºC,4min |
210ºC,4min |
Pass |
| Appearance of paint film |
visually observe |
The appearance is good and uniform. No shrinkage cavity and pinhole. Orange peel, obvious tactile impression of particles. |
Pass |
| Film thickness |
Film thickness gauge measurement |
3-4um |
3um |
| Glossiness |
Gloss meter |
≥95° |
102° |
| Adhesion |
Line distance 1mm, 10×10 squares, pasted with adhesive tape without falling off |
Grade 0 |
Grade 0 |
| Hardness |
≥2H |
≥2H |
2H |
| Anti-alcohol wipe (times) |
Wipe the surface of the coating back and forth with alcohol absorbed by cotton wool until the next layer is seen.(one reciprocation is one time) |
1KG wiping, more than 500 times |
600 times |
| PH value |
PH meter |
8.0-9.0 |
8.4 |
| viscosity |
Coating 4 cups/25ºC/s |
≥90 |
100 |
| T-bend |
GB/T13448 |
≤1 |
0 T |
| Impact resistance |
After impacting with an impact tester, stick it with 3M tape for 3 times, and visually observe that |
50kgf.cm, no cracking, no falling paint qualified |
Pass |
| cupping |
there is no crack at 8mm |
8mm without cracking |
Pass |
| Conclusion |
Pass
|
Packaging & Shipping
FAQ
- Can the lacquer use for other type of metal?
Answer: The lacquer can be widely use on coating of steel, iron, aluminum and other metal coil and substrate, we suggest test the sample according to the actual production line.
- If we are not sure whether the lacquer suitable for the substrate, what can i do?
Answer: Customer not sure for the use of the lacquer, we suggest to post the substrate to us, and tell us the production line settings, then we will do the test in our lab, and then give a workable suggestion for production.
Answer: 100kgs.
- Different production line may have different condition, can the lacquer be adjusted to fit with actual production line?
Answer: Understand such condition, if the monthly ordering quantity reach 1000kg per month, we may adjust the production formula to meet customer's need.
){kind=link}