Waterborne Coil Steel Fingerprint Free Baking Paint, Glossy Metal Special Refurbishment Paint

• Customization: Available
• Usage: Steel Coil Coating
• Color: Colorless to Yellow Transparent Liquid
• Model NO.: 0438
• Appearance: Liquid
• Method: Spray
• Main Raw Material: Acrylic
• Certification: ISO9001
• Substrate: Steel
• Expiration Date: 6 Months
• Packaging: Plastic Drum
• Solid Content: 56±2
• pH Value: 7.0-9.0
• Viscosity: 80-120 Seconds
• Adhesion: 0
• Hardness: ≥2h
• Specification: 20KG/Drum
• Trademark: Kinno
• Origin: China
• Production Capacity: 10000tons/Year
• Package Size: 40.20cm * 29.70cm * 45.00cm
• Package Gross Weight: 45.000kg

Product Description

Product Introduction:

Water-based non-fingerprint varnish is a one-component baking varnish for the surface of metal substrates, mainly used for stainless steel, metal products, fingerprints and fingerprints treatment, to enhance the protection, varnish and smudge-resistant effect, to avoid atmospheric and acidic corrosion. It has excellent adhesion, weather resistance and protective and decorative properties.

Product Characteristics:

Good hardness and flexibility, good adhesion and anti-fouling effect.

Scope of application:
Suitable for all kinds of stainless steel, aluminum, galvanized plate and other materials of the metal surface.

Physical Property

Appearance	Slightly yellow to yellow transparent liquid
Solid content,( 120°C,2h,wt%)	56±2
PH value(25°C)	7.0-9.0
Viscosity (25°C, four cups)	80-120 seconds
Adhesion	Grade 0
Baking conditions	Sheet temperature 210°C-220°C, 4-5 minutes T-bend GB/T13448 ≤1T
Hardness	≥2H
*This performance represents typical results and is not considered a specification and is based on specific COA.

Construction reference:
Surface treatment of substrate: Remove gray matter, rust, oil and other impurities on the surface of the workpiece to be coated, and make the surface of the workpiece to be coated clean and dry;
Construction method: roller coating; spraying
Dilution ratio: 20%-60% of the weight of the original paint, or adjusted according to specific conditions;
Drying mode: plate temperature 210ºC-220ºC, 4-5 minutes.

Precautions:
The degree of metal substrate treatment and the actual baking conditions will directly affect the final effect of the coating film and protective properties; the product should be stored in a cool ventilated place, temperature 5 ºC ~ 30 ºC, the validity period of half a year; such as more than the storage period, after the test can be used.

The above information is obtained from the test, only for reference, not for any guarantee. In view of the limitations of the product function and the diversity of customer requirements, if you use the company's products, please strictly test the adaptability of the product and the stability of the final product according to their own requirements before use.