Heat-Cured Matte Skin Smooth Coating for Metal Surface Jdf001

• Customization: Available
• Warranty: 6 Months
• Powder Coating: Smooth Matte Skin Powder Coating
• Model NO.: JDF001
• Curing Conditions: 160-200ºC10-15min
• Usage: Appliance Paint, Building Coating, Furniture
• Advantage: Environmental Friendly
• Color: Customized
• Brand Name: Kinno
• Transport Package: Carton
• Specification: 25KG/carton
• Trademark: KINNO
• Origin: China
• Production Capacity: 10000tons/Year
• Package Size: 40.20cm * 29.70cm * 45.00cm
• Package Gross Weight: 25.000kg

Product Description

 

Product Description

KINNO Powder Coating (TGIC As a cross-linked agent)

Powder coating is a dry finishing process that involves applying a fine powder to a surface, which is then cured under heat to form a hard, continuous coating. The powder is composed of finely ground particles of pigment and polyester resin, which are electrostatically charged and sprayed onto a substrate. The charged powder particles adhere to the electrically grounded surfaces until the powder is heated and fused into a smooth coating in a curing oven.

Skin type powder coating is a special powder coating used for surface coating, which has a soft and smooth touch, similar to the texture of skin

Advantage

Environmental friendliness: solvent-free, no volatile organic compounds (VOCs) emissions, in compliance with environmental requirements.

Excellent physical properties: It has good wear resistance, corrosion resistance, and impact resistance.

Easy to apply: Powder coating is easy to apply and can be directly cured after spraying, without the need for primer or intermediate coating.

Efficient utilization: The powder can be recycled and reused, reducing waste and improving material utilization.

Cost effectiveness: Compared to traditional coatings, the overall construction and material costs are relatively low.
 

Characteristic

Soft Touch: The coating has a soft touch similar to skin, with a smooth and delicate surface.

Excellent visual effect: It has a matte or silk like appearance, with a uniform and non reflective surface.

Strong weather resistance: It has strong UV resistance and is suitable for indoor and outdoor use.

Diversified colors and textures: Different colors and textures can be customized according to individual needs.

 

Applications

Application 

Home decoration: products that require soft touch and beautiful appearance, such as furniture, doors and windows, lighting fixtures, etc.

Electronic products: phone cases, laptop cases, and other electronic devices that require comfortable hand feel.

Automotive industry: Automotive interior components such as instrument panels, door handles, etc., enhance tactile and visual effects.

Sports and fitness equipment, such as bicycle racks, fitness equipment, etc., enhance the user experience.

Other fields: such as office supplies, daily necessities, and other items that require special tactile and visual effects.
This type of coating is widely used in the field of pursuing high-quality surface treatment, especially suitable for occasions that require enhancing product value through surface tactile sensation.
 
 

Testing Standard and Results

Physical And Chemical Properties
Flat coating film thickness	60um~80um
Curing conditions	160°C/20min; 180°C/15min; 200°C/12min
Acid value	30-36mgkOH/g
Glass transition temperature	≥65
Viscosity (200 ° C,mpa.s)	3800-4800mPa.s/200°C
Indentation hardness	≥80
Adhesion	Grade 0
Impact resistance	no cracking
Cupping test	6mm without cracking
Bending resistance	3mm without cracking
Chemical stability	no bubbles, softening, falling off
Salt spray corrosion resistance	R≤9.5
Moisture and heat resistance	≤ grade 1
Artificially accelerated weather resistance	level 0
Boiling water resistance	no bubbles, water spots, wrinkle spinning, falling off, slightly color difference allowed
Preparation method	After mixing the prepared polyester resin with curing agent TGIC, pigments, fillers and auxiliary agents according to the formula ratio, melt extrusion, tablet pressing and crushing with a twin-screw extruder, and then pulverize the sheet material and sieve it to make it. powder coating. It is sprayed on the surface-treated metal plate with an electrostatic spray gun.

Foshan Faxus New Material Company Limited

Please be noticed that the information and testing results represent above is for reference only. Results and figures above will be changed based on different testing conditions. Customers are suggested to design and test the product formula based on the actual conditions of production properties.  

STORAGE CONDITION
 

• Storage temperature ≤30ºC;
• Storage condition is required to be dry and with good air circulation.
• Avoiding sunlight exposure.

PACKAGE

The products are packed by polyethylene bag, 25kg/carton or 20kg/carton, 1ton/pallet.

 

Detailed Photos

Company Profile

Certifications

FAQ

 Is Faxus Chemical a trader or a production factory?
Answer: We are production factories operate a coating factory and a resin factory in Guangdong province of China. We accumulate rich experience on coating manufacturing and powder coating process.

     How to ensure the color stability of powder coatings?
Answer: When customers need to customize new color orders, we will first spray two color palettes according to their requirements, one for customer confirmation and the other for factory reference. After the customer confirms the color, we will record the formula of the confirmed color palette as the basis for future production. Each batch of orders will be coated with a color palette to compare the color differences and ensure the stability of the paint color.
     
     Is the sample of powder coating free of charge?
Answer: When customers need to customize new color orders, we will first make color customization according to their requirements. Due to the cost involved in the sample, we will charge a sample fee of USD4.5/per color, which includes one aluminum color board and one kilogram of powder coating of the corresponding color. If the customer confirms the color and places a bulk order in our factory, these sample fees will also be deducted from the payment or refunded to the customer.

     My production line is new. Can you provide support for spray painting production technology?
Answer: Our company has a technical team of over 20 product engineers. If customers encounter spray testing problems when they are put into use on a new production line and need assistance, we can provide suggestions through remote video conferences, or customers can pay us to arrange personnel to go and debug.

    What kind of information is required for customizing powder coatings?
Answer: Customer provide the specific requirements which include durability, gloss, color, surface effect, production application, etc.